Push 2 display issues due to USB port power saving (Win)

  • Live Versions: 9.5 and later
  • Operating System: Win 7, 8, 10

If the Push display does not work correctly, for example will not update to reflect the Liveset, there may be some power constrictions preventing it from working correctly.

Please navigate to the Device Manager, drop down the Universal Serial Bus Controllers section, and find the port to which Push 2 is connected. Some investigation is required to find the correct entry, but it will likely be under a 'USB Root Hub' if connected directly to the computer. To be certain, Push 2 will labelled as a 'USB Composite Device' with 500mA power requirement. 

Which USB device is Push

Then navigate to the Power Management' tab and make sure that the following setting is unchecked: "Allow the computer to turn off this device to save power". 

Disable Power Saving

Further troubleshooting articles can be found on this link.