Push 3: Technische Daten zum Audio-Interface

Push 3 verfügt über ein eingebautes Audio-Interface mit 2 symmetrischen Eingängen (Klinke) und 2 symmetrischen Ausgängen (Klinke), Kopfhörerausgang und einem ADAT-Anschluss zur Erweiterung der Audioeingänge mit einem ADAT-fähigen Audiointerface auf insgesamt 10 Eingänge.

An den Eingängen kann zwischen drei Vorverstärker-Arten gewählt werden: Line (symmetrisch), Instrument (unsymmetrisch) und High (hoher Gain für Instrumente, unsymmetrisch). Jeder Eingang bietet zusätzlich einen digitalen Gain von bis zu 20 dB.

Über die Anschlüsse für Pedale kann Push 3 außerdem Steuerspannung (CV) ausgeben. Das Audio-Interface selbst ist allerdings nicht DC-gekoppelt. Im Push-Handbuch kannst du nachlesen, wie du die Pedaleingänge als CV-Ausgänge konfigurierst.

Samplerate: bis 96 kHz

Bittiefe: 24 Bit

Line Input (balanced)
• Full Scale Level: +18dBu
• Nominal Level: +4dBu
• Signal Path Gain: 0dB
• Impedance: 10kOhm (balanced)
• Dynamic Range / SNR full scale, measured @ -1dBFS: 105dB
• THD+N full scale, measured @ -1dBFS: -94dB
• THD+N nominal: -93dB
• THD ratio full scale, measured @ -1dBFS: -94dB
• THD ratio nominal: -105dB
• Noise ratio full scale, measured @ -1dBFS: -106dB
• Noise ratio nominal: -93dB
• Frequency Response: +/- 0,1dB (20Hz - 20kHz)
• Crosstalk L/R: -109dB (10kHz, full scale, measured @ -1dBFS)
• Interchannel Phase: -0,003°
• Intermodulation Distortion (SMPTE): -82dB, full scale, measured @ -1dBFS
• Intermodulation Distortion (SMPTE): -89dB, nominal

Instrument Input Low Gain (unbalanced)
• Full Scale Level: +12dBu
• Nominal Level: -2dBu
• Signal Path Gain: +6dB
• Impedance: 1MOhm (unbalanced)
• Dynamic Range / SNR full scale, measured @ -1dBFS: 105dB
• THD+N full scale, measured @ -1dBFS: -91dB
• THD+N nominal: -91dB
• THD ratio full scale, measured @ -1dBFS: -91dB
• THD ratio nominal: -103dB
• Noise ratio full scale, measured @ -1dBFS: -105dB
• Noise ratio nominal: -91dB
• Frequency Response: +/- 0,1dB (20Hz - 20kHz)
• Crosstalk L/R: -105dB (10kHz, full scale, measured @ -1dBFS)
• Interchannel Phase: -0,002°
• Intermodulation Distortion (SMPTE): -80dB, full scale, measured @ -1dBFS
• Intermodulation Distortion (SMPTE): -87dB, nominal

Instrument Input High Gain (unbalanced)
• Full Scale Level: -8dBu
• Nominal Level: -22dBu
• Signal Path Gain: +26dB
• Impedance: 1MOhm (unbalanced)
• Dynamic Range / SNR full scale, measured @ -1dBFS: 93dB
• THD+N full scale, measured @ -1dBFS: -87dB
• THD+N nominal: -79dB
• THD ratio full scale, measured @ -1dBFS: -89dB
• THD ratio nominal: -93dB
• Noise ratio full scale, measured @ -1dBFS: -93dB
• Noise ratio nominal: -90dB
• Frequency Response: +/- 0,1dB (20Hz - 20kHz)
• Crosstalk L/R: -88dB (10kHz, full scale, measured @ -1dBFS)
• Interchannel Phase: -0,002°
• Intermodulation Distortion (SMPTE): -79dB, full scale, measured @ -1dBFS
• Intermodulation Distortion (SMPTE): -80dB, nominal

Line Output (balanced)
• Full Scale Level: +18dBu
• Nominal Level: +4dBu
• Impedance: 270Ohm (balanced)
• Dynamic Range / SNR full scale, measured @ -1dBFS: 109dB
• THD+N full scale, measured @ -1dBFS: -97dB
• THD+N nominal: -97dB
• THD ratio full scale, measured @ -1dBFS: -98dB
• THD ratio nominal: -111dB
• Noise ratio full scale, measured @ -1dBFS: -109dB
• Noise ratio nominal: -97dB
• Frequency Response: +/- 0,2dB (20Hz - 20kHz)
• Crosstalk L/R: -115dB (10kHz, full scale, measured @ -1dBFS)
• Interchannel Phase: -0,008°
• Intermodulation Distortion (SMPTE): -88dB, full scale, measured @ -1dBFS
• Intermodulation Distortion (SMPTE): -94dB, nominal

Headphone Output (stereo, unbalanced)
Measured at 600Ohm load:
• Full Scale Level: +3dBu
• Impedance: 10Ohm
• Dynamic Range / SNR full scale, measured @ -1dBFS: 93dB
• THD+N full scale, measured @ -1dBFS: -84dB
• THD ratio full scale, measured @ -1dBFS: -85dB
• Noise ratio full scale, measured @ -1dBFS: -95dB
• Frequency Response: +/- 0,3dB (20Hz - 20kHz)
• Crosstalk L/R: -66dB (10kHz, full scale, measured @ -1dBFS)
• Interchannel Phase: 0,004°
• Intermodulation Distortion (SMPTE): -80dB, full scale, measured @ -1dBFS

 

Ableton bietet diese ausführlichen Hilfe- und Lernresourcen an: